Tray Heater (Optional Paper Feed Unit)
D009/D011/D012/D013/D091/D092 2-68 SM
5. Pull out tray 2 from the mainframe.
6. Replace the shoulder screw [4] with the washer screw [5], using the securing bracket
[6] (
x 1).
7. Connect the harness [7] to the connector [8] of the tray heater.
8. Route the harness [7] as shown and clamp it with four clamps (
x 4).
9. Connect the harness [7] to the connector [9] of the mainframe.
To Next Page
Loading...
