Ricoh D009 - Page 115

Tray Heater (Optional Paper Feed Unit)
SM 2-69 D009/D011/D012/D013/D091/D092
Installation
10. Remove the connector cover [10] (
x 1).
11. Release the optional heater relay connector [11] (
x 1).
12. Connect the optional heater relay connector to the connector [12] (rear side) of the
main frame (
x 1).
13. Reassemble the mainframe and optional paper feed unit.
14. Attach the on/standby decal [13] to the right-hand side of the main power switch.