Service Call Conditions
SM Appendix 3-11 D009/D011/D012/D013/D091/D092
Appendix:
Service Call
Conditions
351 D
ID sensor Vsg test error
When the ID sensor was checked, the ID sensor output voltage is 5.0V while
the LED current value is 0.
ID sensor defective or dirty
ID sensor connector defective
Poor ID sensor connection
I/O board (IOB) defective
Scanning system defective
High voltage supply board defective
Defect at the ID sensor pattern writing area of the drum
355 C
Grayscale measurement error
When the grayscale control result is the maximum and it does not operate
correctly and these cases are detected 15 times.
ID sensor defective or dirty
The life of ID sensor or photo conductor
Shield glass dirty
To Next Page
Loading...
