Service Call Conditions
SM Appendix 3-35 D009/D011/D012/D013/D091/D092
Appendix:
Service Call
Conditions
744 B
Booklet staple motor error 2
The 1st detection failure causes a jam error, and the 2nd failure causes this
SC code.
For the 2000-sheet booklet finisher
The rear stapler unit saddle-stitch motor does not start operation within the
specified time.
Motor overload
Loose connection of the rear stapler motor
Defective rear stapler motor
750 B
1000/2000/3000-sheet (booklet) finisher: Tray lift motor error
The 1st detection failure causes a jam error, and the 2nd failure causes this
SC code.
The upper tray paper height sensor does not change its status with the
specified time after the tray raises or lowers.
753 B
Return roller motor error
This occurs during the operation of the lower tray pressure motor
Motor harness disconnected, loose, defective
Motor overloaded
Home position sensor harness disconnected, loose, defective
Home position defective
To Next Page
Loading...
