Ricoh D009 - Page 423

Service Call Conditions
SM Appendix 3-55 D009/D011/D012/D013/D091/D092
Appendix:
Service Call
Conditions
876
CTL
D
Log Data Error
An error is detected in the handling of the log data at power on or during
machine operation. This can be caused by switching the machine off
while it is operating.
-003
Log Data Error 3
 Invalid log encryption key due to defective NVRAM data
1. Initialize the HDD with SP5832-004.
2. Ask the customer's administrator to disable the HDD encryption
setting with a user tool.
-004
Log Data Error 4
 Unusual HDD encryption function due to defective NVRAM data
Initialize the HDD with SP5832-004.
-005
Log Data Error 5
 Installed a NVRAM or HDD which was used in another machine
1. Reinstall the previous NVRAM or HDD.
2. Initialize the HDD with SP5832-004.
-099
Log Data Error 99
 Other than the above causes
Ask your supervisor.