System SP Table-1
SM Appendix 4-7 D009/D011/D012/D013/D091/D092
Appendix:
Service
Program
Mode Tables
021 Roller Center: Special 3
C1b/C1.5b: [100 to 170 / 140 / 1 deg]
C1c/C1.5c: [100 to 170 / 150 / 1 deg]
022 Roller Ends: Special 3
C1b/C1.5b: [100 to 170 / 145 / 1 deg]
C1c/C1.5c: [100 to 170 / 155 / 1 deg]
023 Feed Waiting: Plain Turns the feed waiting mode on or off for
each paper type.
[0 to 1 / 0 / 1]
0=Off, 1=On
The paper waits at the registration roller
until the fusing temperature reaches the
prescribed temperature (adjustable with
SP1105-028 to -37).
If you enable this feature, also set SP
1105-38 to a convenient value for the
customer.
024 Feed Waiting: M-Thick
025 Feed Waiting: Thick 1
026 Feed Waiting: Thick 2
027 Feed Waiting: Thin
028 Feed Wait: Center Minus: Plain
Adjusts the offset value for each re-load
temperature to exit the feed waiting
mode.
[0 to 60 / 0 / 1 deg]
029 Feed Wait: Ends Minus: Plain
030 Feed Wait: Center Minus: M-Thick
031 Feed Wait: Ends Minus: M-Thick
032 Feed Wait: Center Minus: Thick 1
033 Feed Wait: Ends Minus: Thick 1
034 Feed Wait: Center Minus: Thick 2
035 Feed Wait: Ends Minus: Thick 2
036 Feed Wait: Center Minus: Thin
037 Feed Wait: Ends Minus: Thin
To Next Page
Loading...
