System SP Table-1
SM Appendix 4-13 D009/D011/D012/D013/D091/D092
Appendix:
Service
Program
Mode Tables
009
Web Motor Rotation: Power On
[0 to 10 / 2 / 1 times]
Adjusts the number of web motor rotations at the re-load state.
010
Web Motor Interval: Pre-idle
[0 to 30 / 5 / 1 sec]
Adjusts the motor waiting time after the fusing motor idling.
011
Web Motor Rotation: Pre-idle
[0 to 10 / 2 / 1 times]
Adjusts the number of web motor rotations at the fusing idling state.
1903 Cleaning Web Setting
001
Total Paper Counter
[0 to 999999999 / 0 / 1 sec]
Displays the total paper feeding time.
002
Total Web Motor Drive Time
[0 to 999999999 / 0 / 1 sec]
Displays the total time of web motor rotation.
1907
Paper Feed Timing Adj. (DFU)
001 Feed Solenoid ON: Plain
[-10 to 40 / 0 / 2.5 mm]
002 Feed Solenoid ON: Thick
003 Feed Solenoid OFF: Plain
[-10 to 10 / 0 / 1 mm]
004 Feed Solenoid OFF: Thick
005 Feed Clutch ON: Plain
006 Feed Clutch ON: Thick
007 Stop Position before Inverter
008 Stop Position after Inverter
To Next Page
Loading...
