Ricoh D009 - Page 452

System SP Table-2
D009/D011/D012/D013/D091/D092 4-20 SM Appendix
005
Bias Adjustment 3
[0 to 100 / 30 / 10 vol]
Adjusts the correction voltage adjustment step size.
2102*
Magnification Adjustment
Main Scan
[-2 to 2 / 0 / 0.1 %]
Adjusts the magnification in the main scan direction for copy mode and
printer mode. Press "Clear/Stop" key to toggle plus or minus.
2103*
Erase Margin Adjustment
Adjusts the erase margin by deleting image data at the margins.
L Size: 297.1 mm or more (length)
M Size: 216.1 to 297 mm (length)
S Size: 216 mm or less (length)
001 Leading Edge
[0 to 9 / 3 / 0.1mm]
002 Trailing Edge
003 Left
[0 to 9 / 2 / 0.1mm]
004 Right
005 Duplex Trail.: L Size: Plain
[0 to 4 / 1 / 0.1mm]
006 Duplex Trail.: M Size: Plain
[0 to 4 / 0.8 / 0.1mm]
007 Duplex Trail.: S Size: Plain
[0 to 4 / 0.6 / 0.1mm]
008 Duplex Left: Plain
[0 to 1.5 / 0.3 / 0.1mm]
009 Duplex Right: Plain
010 Duplex Trail.: L Size: Thick
[0 to 4 / 0.8 / 0.1mm]
011 Duplex Trail.: M Size: Thick
[0 to 4 / 0.6 / 0.1mm]
012 Duplex Trail.: S Size: Thick
[0 to 4 / 0.4 / 0.1mm]