System SP Table-2
D009/D011/D012/D013/D091/D092 4-26 SM Appendix
004
GAIN
[0 to 255 / 0 / 1]
Displays the GAIN value used to calculate the on time for the toner supply
motor.
005
Image Pixel Count
[0 to 255 / 0 / 1]
Displays the image pixel count.
2228*
Developer Lot
Displays the lot number of the developer. (The lot number is embossed on
the top edge of the developer pack.)
2301*
Transfer Current Adjustment
If the transfer current of image area is set highly than normal, the print
image is easily come out. If the leading transfer current is set as same, the
black line is come out due to exfoliation leave.
001
Image Area: 1st Side
[10 to 100 / 45 / 1 A ]
Adjusts the transfer current for printing the first side of the paper
002
Image Area: 2nd Side
[10 to 100 / 40 / 1
A ]
Adjusts the transfer current for printing the second side of the paper
003
Leading Edge: 1st Side
[10 to 100 / 20 / 1
A ]
Adjusts the transfer current for copying at leading edge the first side of the
paper.
Increase the current to separate the paper from the drum properly in high
humidity and high temperature conditions.
To Next Page
Loading...
