Ricoh D009 - Page 460

System SP Table-2
D009/D011/D012/D013/D091/D092 4-28 SM Appendix
002
Paper Upper Width (b)
[151 to 296 / 216 / 1 mm ]
Adjusts the upper paper width threshold for the transfer current, charge
voltage, and development bias corrections.
As for SP2-309-1, but the factors are in SP2-309-4 (paper tray) and
SP2-309-6 (by-pass).
003
Paper Tray: Plain (alpha)
[1 to 3 / 1 / 0.1 ]
Adjusts the transfer current correction coefficient used if the paper width is
less than the setting of SP2-309-1.
004
Paper Tray: Plain (beta)
[1 to 3 / 1 / 0.1 ]
Adjusts the transfer current correction coefficient used if the paper width is
less than the setting of SP2-309-2.
005
By-pass: Plain (gamma)
[1 to 3 / 1.1 / 0.1 ]
Adjusts the transfer current correction coefficient used if the paper width is
less than the setting of SP2-309-1.
006
By-pass: Plain (delta)
[1 to 3 / 1.1 / 0.1 ]
Adjusts the transfer current correction coefficient used if the paper width is
less than the setting of SP2-309-2.
007 Paper Tray: Thick 1 (alpha)
[1 to 3 / 1 / 0.1 ]
008 Paper Tray: Thick 1 (beta)
009 By-pass: Thick 1 (gamma)
[1 to 3 / 1.1 / 0.1 ]
010 By-pass: Thick 1 (delta)
011 Paper Tray: Thick 2 (alpha)
[1 to 3 / 1.1 / 0.1 ]
012 Paper Tray: Thick 2 (beta)
013 By-pass: Thick 2 (gamma)
[1 to 3 / 1.5 / 0.1 ]