Ricoh D009 - Page 470

System SP Table-3
D009/D011/D012/D013/D091/D092 4-38 SM Appendix
003 Vsdp
[0 to 5 / 0 / 0.1]
004 Vsm/Vsg
[0 to 5 / 0 / 0.1]
3902*
New PCU Detection (Not used)
001
On/OFF Setting
[0 to 1 / 0 / 1]
0: On, 1: Off
Turns on or off the new unit detection for the transfer belt unit and fusing
unit.
3905*
Hot Roller Stripper Cleaning
"Cleaning A": 15 sec. off/on cycle for the fusing motor.
"Cleaning B": Off (45 sec.) and On (15 sec.) cycle for the fusing motor.
001
1st Cleaning: Interval
Sets the threshold for the 1st cleaning mode.
"Cleaning A" is done once.
[0 to 5 / 5 / 1 sheets]
002
1st Cleaning: Mode Setting
Sets the number of additional execution times of the 1st cleaning mode.
[0 to 5 / 0 / 1 times]
003
2nd Cleaning: Interval
Sets the threshold for the 2nd cleaning mode.
"Cleaning A" is done twice.
[6 to 49 / 30 / 1 sheets]