System SP Table-3
SM Appendix 4-39 D009/D011/D012/D013/D091/D092
Appendix:
Service
Program
Mode Tables
004
2nd Cleaning: Mode Setting
Sets the number of additional execution times of the 2nd cleaning mode.
[0 to 5 / 0 / 1 times]
005
3rd Cleaning: Interval
Sets the threshold for the 3rd cleaning mode.
"Cleaning A" is done twice and "Cleaning B" is done "N" times.
"N" is specified with SP3905-006.
[50 to 999 / 100 / 1 sheets]
006
3rd Cleaning: Mode Setting
Sets the number of execution times of the 3rd cleaning mode.
[0 to 5 / 0 / 1 times]
All fans remain on during cleaning and then switch off 60sec after
the cleaning cycle ends.
007
Cleaning Priority Setting
[0 to 1 / 0 / 1 sheets]
0: Priority to printing (No job interruption)
1: Priority to cleaning (Job interruption)
To Next Page
Loading...
