System SP Table-4
D009/D011/D012/D013/D091/D092 4-76 SM Appendix
4804* Returning to Scanner HP
Moves the exposure lamp a short distance
and immediately returns it to its home
position.
Touch [Execute] > "Completed" > [Exit]
4806
Moving from Scanner HP
Moves the exposure lamp a short distance away from the home position and
stops.
Touch [Execute] > "Completed" > [Exit]
Do SP4804 to return the exposure lamp to its home position.
This SP is done before shipping the machine to another location.
Cycling the machine power off/on also returns the exposure lamp to
its home position.
4903*
Filter Setting
This SP code sets the threshold value for independent dot erase.
These adjustments are effective only for the "Custom Setting" original type.
The "0" setting disables independent dot erase.
A higher setting detects more spurious dots for erasing. However, this could
erase dots in images that contain areas filled by dithering.
001 Independent Dot Erase: Text/Photo
[0 to 7 / 0 / 1 ]
002 Independent Dot Erase: Generation Copy
4905* Dither Selection
Changes the parameters for dithering.
[0 to 255 / 0 / 1 ]
To Next Page
Loading...
