System SP Table-4
SM Appendix 4-77 D009/D011/D012/D013/D091/D092
Appendix:
Service
Program
Mode Tables
4907 SBU Test Pattern Change
[0 to 255 / 0 / 1 ]
0: Default (Scanning Image)
1: Grid pattern
2: Gradation main scan
3: Gradation sub scan
4 to 250: Default (Scanning Image)
4908* Factory Setting Input
001
Execution: ON/OFF
Copies the settings of the previous black level adjustment and gain
adjustment to the factory settings.
002
Execution Flag
[0 to 1 / 0 / 1 ]
Displays the execution flag of the factory setting input. "1" means that the
scanner settings have been adjusted at the factory.
4918
Manual Gamma Adjustment (DFU)
Adjusts the offset data of the printer gamma for black in Photo mode or
Letter mode.
Touch [Change] to open the printer gamma screen.
Enter the manual gamma adjustment screen.
To Next Page
Loading...
