System SP Table-5
D009/D011/D012/D013/D091/D092 4-88 SM Appendix
5307 Summer Time
001
Setting
[0 to 1 / 1 (NA/EU), 0 (ASIA) / 1 /step]
0: Disabled
1: Enabled
Enables or disables the summer time mode.
Make sure that both SP5-307-3 and -4 are correctly set. Otherwise,
this SP is not activated even if this SP is set to "1".
003
Rule Set (Start)
Specifies the start setting for the summer time mode.
There are 8 digits in this SP. For months 1 to 9, the "0" cannot be input in the
first digit, so the eight-digit setting for -2 or -3 becomes a seven-digit setting.
1st and 2nd digits: The month. [1 to 12]
3rd digit: The week of the month. [1 to 5]
4th digit: The day of the week. [0 to 6 = Sunday to Saturday]
5th and 6th digits: The hour. [00 to 23]
7th digit: The length of the advanced time. [0 to 9 / 1 hour /step]
8th digit: The length of the advanced time. [0 to 5 / 10 minutes /step]
For example: 3500010
The timer is advanced by 1 hour at am 0:00 on the 5th Sunday in March.
The digits are counted from the left.
Make sure that SP5-307-1 is set to "1".
To Next Page
Loading...
