Ricoh D009 - Page 526

System SP Table-5
D009/D011/D012/D013/D091/D092 4-94 SM Appendix
021 Fax
[0 or 1/ 0 / 1] 0: ON. 1: OFF
Determines whether certification is required
before a user can use the fax application.
031 Scanner
[0 or 1/ 0 / 1] 0: ON. 1: OFF
Determines whether certification is required
before a user can use the scanner
application.
041 Printer
[0 or 1/ 0 / 1] 0: ON. 1: OFF
Determines whether certification is required
before a user can use the printer application.
051 SDK1
[0 or 1/ 0 / 1] 0: ON. 1: OFF
Determines whether certification is required
before a user can use the SDK application.
061 SDK2
071 SDK3
5481
Authentication Error Code
These SP codes determine how the authentication failures are displayed.
001 System Log Disp
[0 or 1 / 0 / -]
0: OFF [Default], 1: ON
Determines whether an error code appears in the
system log after a user authentication failure occurs.
002 Panel Disp
[0 or 1 / 1 / 1]
0: OFF, 1: ON [Default]
Determines whether an error code appears on the
operation panel after a user authentication failure
occurs.