System SP Table-5
D009/D011/D012/D013/D091/D092 4-102 SM Appendix
5802*
Free Run
Performs a free run on the copier engine.
The correct paper should be loaded in the 1st tray or 2nd tray, but paper is
not fed.
The main switch has to be turned off and on after using the free run mode
for a test.
001 TRAY1:A4LEF -
002 TRAY2:A3 -
003 TRAY2:A4SEF -
5803
Input Check
Displays the signals received from sensors and switches.
(
p.4-236 "Input Check")
5804
Output Check
Turns on the electrical components individually for test purposes. (
p.4-249 "Output Check")
5810
SC Reset
Fusing SC Reset
Resets all level A service call conditions, such as
fusing errors. To clear the service call, touch
"Execute" on the LCD, then turn the main power
switch off/on.
5811*
Machine No. Setting (DFU)
Code Set
This SP presents the screen used to enter the 11-digit number of the
machine. The allowed entries are "A" to "Z" and "0" to "9". The setting is
done at the factory, and should not be changed in the field.
To Next Page
Loading...
