System SP Table-5
SM Appendix 4-103 D009/D011/D012/D013/D091/D092
Appendix:
Service
Program
Mode Tables
5812* Service Tel. No. Setting
001 Service
Inputs the telephone number of the CE (displayed when a
service call condition occurs.)
002 Facsimile
Use this to input the fax number of the CE printed on the
Counter Report (UP mode).
003 Supply
Inputs the telephone number of the supplier displayed on the
user mode screen.
004 Operation
Allows the service center contact telephone number to be
displayed on the user mode screen.
5816 Remote Service
001
I/F Setting
Selects the remote service setting.
[0 to 2 / 2 / 1 /step]
0: Remote service off
1: CSS remote service on
2: @Remote service on
002
CE Call
Performs the CE Call at the start or end of the service.
[0 or 1 / 0 / 1 /step]
0: Start of the service
1: End of the service
NOTE: This SP is activated only when SP 5816-001 is set to “2”.
To Next Page
Loading...
