System SP Table-5
SM Appendix 4-117 D009/D011/D012/D013/D091/D092
Appendix:
Service
Program
Mode Tables
5824
NVRAM Data Upload
Uploads the NVRAM data to an SD card. Push Execute.
Note: When uploading data in this SP mode, the front door must be open.
IMPORTANT NOTE:
The following data stored in the NVRAM will not be saved on the SD Card
when performing an NVRAM Data Upload (SP5824):
• Total count categories (SP7-003-***Copy Counter)
• C/O P/O Counter (SP7-006-*** C/O, P/O Count Display)
• Duplex, A3/DLT/Over 420mm, Stapler and Scanner application
scanning counters(system settings).
• Engine SP Data
Therefore, whenever an NVRAM Upload/Download is performed, make sure
to print out the SP Data List before performing SP5801-001 (Memory Clear)
or SP5801-002 (Memory Clear: Engine).
5825
NVRAM Data Download
Downloads data from an SD card to the NVRAM in the machine. After
downloading is completed, remove the card and turn the machine power off
and on.
5828 Network Setting
050
1284 Compatibility
(Centro)
Enables and disables bi-directional
communication on the parallel connection
between the machine and a computer.
[0 to 1 / 1 / 1 ]
0:Off, 1: On
052 ECP (Centro)
Disables and enables the ECP feature (1284
Mode) for data transfer.
[0 to 1 / 1 / 1]
0: Disabled, 1: Enabled
To Next Page
Loading...
