System SP Table-5
D009/D011/D012/D013/D091/D092 4-118 SM Appendix
065 Job Spooling
Switches the job spooling on and off.
[0 to 1 / 0 / 1]
0: No spooling, 1: Spooling enabled
066
Job Spooling Clear: Start
Time
This SP determines whether the job interrupted
at power off is resumed at the next power on.
This SP operates only when SP5828-065 is set
to "1".
[0 to 1 / 1 / 1]
1: Resumes printing spooled jog.
0: Clears spooled job.
069
Job Spooling (Protocol)
This SP determines whether job spooling is
enabled or disabled for each protocol. This is a
8-bit setting.
[0 to 1 / 1 / 1]
0: No spooling, 1: Spooling enabled
0 LPR 4 BMLinks (Japan Only)
1 FTP (Not Used) 5 DIPRINT
2 IPP 6 Reserved (Not Used)
3 SMB 7 Reserved (Not Used)
090
TELNET
(0:OFF 1:ON)
Disables or enables Telnet operation. If this SP
is disabled, the Telnet port is closed.
[0 to 1 / 1 / 1]
0: Disable, 1: Enable
091
Web
(0:OFF 1:ON)
Disables or enables the Web operation.
[0 to 1 / 1 / 1]
0: Disable, 1: Enable
To Next Page
Loading...
