Ricoh D009 - Page 589

System SP Table-6
SM Appendix 4-157 D009/D011/D012/D013/D091/D092
Appendix:
Service
Program
Mode Tables
6020*
Skew Correction Adjustment
Turns the original skew correction in the ARDF for all original sizes on or off.
[0 to 1 / 0 / 1 ]
0: Off (only for small original sizes)
1: On (for all original sizes)
6128
Punch Position: Sub Scan
Adjusts the punching position in the sub scan direction. (For B804/B805)
001 2-Hole: DOM (Japan)
[-7.5 to 7.5 / 0 / 0.5 mm]
002 3-Hole: NA
003 4-Hole: EU
004 5-Hole: SCAN
005 2-Hole: NA
006 1-Hole: DOM (Japan)
6129
Punch Position: Main Scan
Adjusts the punching position in the main scan direction. (For B804/B805)
001 2-Hole: DOM (Japan)
[-2 to 2 / 0 / 0.4 mm]
002 3-Hole: NA
003 4-Hole: EU
004 4-Hole: SCAN
005 2-Hole: NA
006 1-Hole: DOM (Japan)