System SP Table-7
SM Appendix 4-177 D009/D011/D012/D013/D091/D092
Appendix:
Service
Program
Mode Tables
7807
SC/Jam Counter Reset
Resets the SC and jam counters. To reset, press Execute on the touch
panel.
This SP does not reset the jam history counters: SP7507, SP7508.
7826
MF Error Counter Japan Only
Displays the number of counts requested of the card/key counter.
001 Error Total
A request for the count total failed at power on. This error
will occur if the device is installed but disconnected.
002 Error Staple
The request for a staple count failed at power on. This error
will occur if the device is installed but disconnected.
7827
MF Error Counter Clear Japan Only
Press Execute to reset to 0 the values of SP7826. Japan Only
7832
Self-Diagnose Result Display
Execute to open the "Self-Diagnostics Result Display" to view details about
errors. Use the keys in the display on the touch-panel to scroll through all
the information. If no errors have occurred, you will see the "No Error"
message on the screen.
7836
Total Memory Size
Displays the memory capacity of the controller system.
To Next Page
Loading...
