Printer Service Table
D009/D011/D012/D013/D091/D092 4-262 SM Appendix
bit 3
IPDS
print-side
reversal
0: Disable 1: Enable
If enabled, the simplex pages of IPDS jobs will be printed on the front
side because of printing on the back side of the page. This might
reduce printing speed.
bit 4 DFU - -
bit 5 DFU - -
bit 6 DFU - -
bit 7 DFU - -
1001 Bit Switch
005 Bit Switch 5 0 1
bit 0
Show "Collate Type", "Staple Type" and
"Punch Type" buttons on the operation
panel.
0: Disable 1: Enable
If enabled, users will be able to configure a Collate Type, Staple Type, and
Punch Type from the operation panel. The available types will depend on
the device and configured options.
After enabling the function, the settings will appear under:
"User Tools > Printer Features > System"
bit 1 DFU - -
bit 2
Prevent SDK applications from altering
the contents of a job.
0: Disable 1: Enable
If this BitSw is enabled, SDK applications will not be able to alter print
data. This is achieved by preventing SDK applications from accessing a
module called the "GPS Filter".
Note: The main purpose of this BitSw is for troubleshooting the effects of
To Next Page
Loading...
