2000/3000-Sheet Finishers (B804/B805)
SM 2-47 D009/D011/D012/D013/D091/D092
Installation
Holder bracket [6] must be placed outside the front joint bracket [5]. This
bracket is provided with the Bridge Unit (D386).
8. Pull the lock lever [7] ( x 1).
9. Slowly push the finisher to the left side of the machine, keeping its front door open until
the brackets [4] [5] go into their slots.
10. Push the lock lever [7], and then secure it (
x 1).
11. Close the front door of the finisher.
12. Connect the finisher connector [8] to the machine.
13. Install the upper output tray [9] (
x 1; M3 x 8).
14. Only for B804, install the lower output tray [10].
To Next Page
Loading...
