2000/3000-Sheet Finishers (B804/B805)
D009/D011/D012/D013/D091/D092 2-46 SM
4. Attach the cushion [2] to the finisher.
Make sure that the cushion is placed within 0 to 1 mm from the edge of the
cover.
5. Install the ground plate [3] on the finisher (
x 2; M3 x 6).
6. Attach the rear joint bracket [4] ( x 2; M4 x 14).
7. Attach the front joint bracket [5] and the holder bracket [6] (
x 2; M4 x 14).
To Next Page
Loading...
