SERVICE PROGRAM MODE
SM 5-19 G108
Service
Tables
5858 Debug Save When
Engine SC Error [0 to 1 / 0 / 1/step]
0: Collected, 1: Not collected
5858 001*
Collects debug logs when an engine-related SC code is generated.
System SC Error [0 to 1 / 0 / 1/step]
0: Collected, 1: Not collected
5858 002*
Collects debug logs when a controller-related SC code is generated.
Any SC Error [00000 to 65535 / 0 / 1/step] 5858 003*
Specifies the SC number whose logs are collected.
Jam [0 to 1 / 0 / 1/step]
0: Collected, 1: Not collected
5858 004*
Collects debug logs when a paper jam occurs.
5859 Log Save Key No. [0000000 to 9999999 / 0 / 1/step]
5859 001* Key 1
5859 002* Key 2
5859 003* Key 3
5859 004* Key 4
5859 005* Key 5
5859 006* Key 6
5859 007* Key 7
5859 008* Key 8
5859 009* Key 9
5859 010* Key 10
Specifies the key number of a specific event
whose logs are saved in the specified storage.
When multiple key numbers are assigned, the
logs are collected in the following order: Key 1,
Key 2, ..., Key 9, Key 10.
NOTE: The event is specified by Engine SP5-
857-2. The storage is specified by Engine SP5-
858.
5860 SMTP/POP3/IMAP
SMTP Server Port No. [1 to 65535 / 25 / 1/step] 5860 002*
Specifies the number of the SMTP server ports.
SMTP Auth. [0 to 1 / 0 / 1/step]
• 0: Disable, • 1: Enable
5860 003*
Enables or disables the SMTP authentication for mail transfers.
SMTP Auth. Encryption [0 to 2 / 0 / 1/step]
• 0: Automatic, • 1: Not encrypt, • 1: Encrypt
5860 006*
Encrypts or does not encrypt passwords for SMTP authentications.
POP before SMTP [0 to 1 / 0 / 1/step]
• 0: Disable, • 1: Enable
5860 007*
Enables or disables the authentication that is executed on the POP server
before the communication is established with the SMTP server.
POP to SMTP Wait [0 to 10000 / 300 / 1 ms/step] 5860 008*
Specifies the waiting time to access the SMTP server after the authentication
on the POP server.
POP Auth. Encryption [0 to 2 / 0 / 1/step]
• 0: Automatic, • 1: Not encrypt, • 1: Encrypt
5860 013*
Encrypts or does not encrypt passwords for POP3/IMAP4 authentications.
POP Server Port No. [1 to 65535 / 110 / 1/step] 5860 014*
Specifies the port number of the POP server.
SMTP from Replace [0 to 1 / 0 / 1/step] 5860 022*
Determines whether the FROM item of the mail header is switched to the
validated account after the SMTP server is validated.
0: No. “From” item not switched, 1: Yes. “From” item switched.
To Next Page
Loading...
