53
[Communication Mode]
Selects the current communication mode between the Local connection mode and the
Remote transmission mode.
[Remote (RMT) Data Receiver]
Selects the data receiving device for the Remote transmission mode.
[Remote (RMT) Error Transaction]
Selects how to process communication errors in the Remote transmission mode.
[Serial Communication (Com.) Speed]
Selects the serial communication speed between the printer and the data receiving
device for the Remote transmission mode.
[AT Command Output]
Outputs a selected AT command to the connected data receiving device.
☞ p.154...[Customizing the Initial Settings]
C
hanging the Data
Mode Configuration
You may be required to change the Data mode configuration according to your
operation requirements for printing out the document data sent from the computer.
The following items can be configured on the Main Display. For the detailed
descriptions and procedures, refer to the chapter “Customizing the Initial Settings” on
page 154.
To Next Page
Loading...
