Riso RP3100UI - Paper Size Setting

148
Enter a new name for the selected
paper size setting.
The [Rename] window can be switched between
the uppercase window and the lowercase window
by touching the [Shift] button.
• Up to ten spaces can be entered.
• Numerals can be entered with the Print Quantity
keys.
• Touch the [
h
C] button to erase an entered letter
(one letter will be erased each time this button
is touched).
A3/Black
13:59
Cancel OK
Rename
C
Shift
[Card A
Blocked
5 6 7 8 9 04321
T Y U I O PREWQ
G H J K L :FDSA
B N M < > :VCX
( ) [ ] ~/-
*
M
Change the paper size.
Change the paper length and width with the [
c
]
[
d
] buttons or the Print Quantity keys.
• To shift the cursor, press the [q] key or
touch the relevant field directly.
• Press the [C] key to return to the default
setting.
• The ranges of the length and width to be
specified are shown below the respective
fields.
• The name for the current paper size is shown
above the [Rename] button.
NOTE
• Skip this step if the paper size does not
require any change.
• Proceed to step 11 if the name does
not require any change.
Using Custom Paper
A3/Black
13:59
Cancel OK
Cutom Paper Entry
(90mm ~ 340mm)
103 mm
Rename
U-1
(140mm ~ 555mm)
182 mm
Properties
Blocked
Touch the [Rename] button.
The [Rename] window appears.
A3/Black
13:59
Cancel OK
Cutom Paper Entry
(90mm ~ 340mm)
103 mm
Rename
(140mm ~ 555mm)
182 mm
Properties
Blocked
U-1
6
7
8