RKC INSTRUMENT RB Series User Manual

8. PARAMETER DESCRIPTION
IMR02C15-E4
8-10
8.3.2 Setting item
Auto (AUTO)/Manual (MAN) transfer
Factory default setting:
The screen is displayed.
Use to transfer the Auto (AUTO) mode or Manual (MAN) mode.
Auto (AUTO) mode: Automatic control is performed.
Manual (MAN) mode: The Manipulated output value (MV1 or MV2) can be
manually changed.
Data range Factory set value
0000: Auto (AUTO) mode
0001: Manual (MAN) mode
0000
To hide the Auto (AUTO)/Manual (MAN) transfer, set “No display” to
Mode selection (no display) (P. 8-58) in the Engineering mode.
For details of the Auto (AUTO)/Manual (MAN) transfer,
refer to 6.5 Auto/Manual Transfer (P. 6-20).
Related parameters
Engineering mode:
• Mode selection (no display) (P. 8-58)
Set data unlock/lock transfer
Factory default setting:
The screen is displayed.
Lock or unlock the setting data.
Data range Factory set value
0000: Unlock
0001: Lock
0000
To lock parameters, select the parameters at Set lock level (P. 8-57) in the
Engineering mode.
To hide the parameter of Set data unlock/lock transfer, set “No display”
to the Mode selection (no display) (P. 8-58) if the Engineering mode.
For details of the Set data unlock/lock transfer, refer to 6.6 Protecting
Setting Data (P. 6-24).
Related parameters
Engineering mode:
• Set lock level (P. 8-57)
• Mode selection (no display) (P. 8-58)
AUTO
MAN
ULCK
LCK

RKC INSTRUMENT RB Series Specifications

General

Brand	RKC INSTRUMENT
Model	RB Series
Category	Temperature Controller
Language	English