8. PARAMETER DESCRIPTION
IMR02C15-E4
8-23
Continued from the previous page.
Related parameters
Parameter setting mode:
• Event 1 set value (EV1) [high] to Event 4 set value (EV4) [high] (P. 8-20)
Engineering mode:
• Event 1 set value (EV1’) [low] to Event 4 set value (EV4’) [low] (P. 8-69)
• Event 1 type to Event 4 type (P. 8-101)
• Event 1 hold action to Event 4 hold action (P. 8-110)
• Event 1 differential gap to Event 4 differential gap (P. 8-113)
• Event 1 output action at input burnout to Event 4 output action at input
burnout (P. 8-115)
• Energized/De-energized of Event 1 output to Energized/De-energized of
Event 4 output (P. 8-116)
• Event 1 timer to Event 4 timer (P. 8-118)
• Event 1 interlock to Event 4 interlock (P. 8-120)
To Next Page
Loading...
