RKC INSTRUMENT RB Series - Page 188

8. PARAMETER DESCRIPTION
IMR02C15-E4
8-64
Dummy
F02
Timer function
Link to the Timer function in the Parameter setting mode.
For details of Timer function, refer to 8.4.2 Parameter setting item
(P. 8-16).
Related parameter
Parameter setting mode:
• Timer 1, Timer 2, Timer 3, and Timer 4 (P. 8-15)
• Timer function (P. 8-16)
• Repeat execution times (P. 8-17)
• Setting change rate limiter (up), Setting change rate limiter (down) (P. 8-18)
Engineering mode:
• Timer 1, Timer 2, Timer 3, and Timer 4 (P. 8-63)
• Repeat execution times (P. 8-64)
• Setting change rate limiter (up), Setting change rate limiter (down) (P. 8-66)
F02
Repeat execution times
Link to the Repeat execution times in the Parameter setting mode.
For details of Repeat execution times, refer to 8.4.2 Parameter setting
item (P. 8-17).
Related parameter
Parameter setting mode:
• Timer 1, Timer 2, Timer 3, and Timer 4 (P. 8-15)
• Timer function (P. 8-16)
• Repeat execution times (P. 8-17)
• Setting change rate limiter (up), Setting change rate limiter (down) (P. 8-18)
Engineering mode:
• Timer 1, Timer 2, Timer 3, and Timer 4 (P. 8-63)
• Timer function (P. 8-64)
• Setting change rate limiter (up), Setting change rate limiter (down) (P. 8-66)
TMFS
RPTS