RKC INSTRUMENT RB Series - Page 195

8. PARAMETER DESCRIPTION
IMR02C15-E4 8-71
Dummy
Function block 05 (F05)
This is the first parameter symbol of Function block 05 (F05).
F05
Autotuning (AT)
Link to the Autotuning (AT) in the Parameter setting mode.
For details of Autotuning (AT), refer to 8.4.2 Parameter setting item
(P. 8-24).
Related parameter
Parameter setting mode:
• Autotuning (AT) (P. 8-24)
Engineering mode:
• AT cycles (P. 8-130)
• AT differential gap time (P. 8-131)
F05
Startup tuning (ST)
Link to the Startup tuning (ST) in the Parameter setting mode.
For details of Startup tuning (ST), refer to 8.4.2 Parameter setting item
(P. 8-25).
Related parameter
Parameter setting mode:
• Startup tuning (ST) (P. 8-25)
Engineering mode:
• ST start condition (P. 8-132)
F05.
aATU
aSTU