1. OUTLINE
IMR02C15-E4
1-11
Bottom View
Loader communication
connector
(Standard equipment)
Setting and monitoring on a personal computer (PC) is possible if the controller is
connected with our cable to a PC via our USB communication converter COM-K-1 (sold
separately)
1
. Our communication software
2
must be installed on the PC.
1
For the COM-K, refer to COM-K Instruction Manual (IMR01Z01-E□).
2
Only available as a download from the official RKC website.
http://www.rkcinst.com.
Continued on the next page.
RB100 RB400 RB900
Loader communication connector (Standard equipment)
RB500 *
RB700
Loader communication connector
(Standard equipment)
* Side view
To Next Page
Loading...
