Roche COBAS INTEGRA 400 plus User Manual

7 Block codes for extended host interface
Roche Diagnostics
COBAS INTEGRA 400 plus analyzer/Cedex Bio HT Analyzer · Software version 3.6/5.1 · Host Interface Manual · Version 1.24
Block codes for extended host interface 129
Test status blocks
In this section
Block 45: Test status request (129)
Block 46: Test Status Response (129)
Block 47: Failed Test Status Request (129)
Block 45: Test status request
Block 45 is used to interrogate the test status. Block 45
has no lines.
Block 46: Test Status Response
This response provides the test status for all loaded tests.
Block 47: Failed Test Status Request
Block 47 contains Line 96 and provides the eventual error
encountered following request with Block 45.
Line code Description Iteration
(1)(2)(3)(4)(5)
(1) m is the total number of loaded tests.
(2) x is the number of cassettes for a specific test. The maximum value
is set to 6.
(3) y is the number of calibrators for a specific test. The maximum value
is set to 6.
(4) z is the number of controls for a specific test. The maximum value is
set to 6.
(5) w is the number of diluents for a specific test. The maximum value is
set to 6.
55 Test ID
1 to m
28 Test Status
29 Cassette Status 0 to x
31 Calibrator status 0 to y
33 Control status 0 to z
38 Diluents status 0 to w
y Block 46
Line code Description
96 Error Message
y Block 47

Roche COBAS INTEGRA 400 plus Specifications

General

Brand	Roche
Model	COBAS INTEGRA 400 plus
Category	Measuring Instruments
Language	English