Roche COBAS INTEGRA 400 plus - Control Messages Blocks; Block 99: Control Message

4 Block codes
Roche Diagnostics
COBAS INTEGRA 400 plus analyzer/Cedex Bio HT Analyzer · Software version 3.6/5.1 · Host Interface Manual · Version 1.24
80 Control messages blocks
Control messages blocks
In this section
Block 99: Control Message (80)
Block 99: Control Message
The control message block is transferred upon a general
error, e.g. transmission disturbed, block check sum error
or invalid block or line structure build up. Block 99
contains one line.
Line
code
Description
99 General Error Code
y Block 99