Roche COBAS INTEGRA 400 plus - Enabling Host Interface Tracing

9 Troubleshooting
Roche Diagnostics
COBAS INTEGRA 400 plus analyzer/Cedex Bio HT Analyzer · Software version 3.6/5.1 · Host Interface Manual · Version 1.24
176 Enabling host interface tracing
Enabling host interface tracing
r To enable host interface tracing
1 Switch to the Message Handler task.
2 From the menu, choose Monitor > Filter.
3 Select the 1023 TRACE_HIF_LINE trace.
4 Choose the OK button.
f The system then records all host interface
communication.
5 To make these settings permanent, choose the Save
button.
I These settings only remain until the next
shutdown.
3