Roche COBAS INTEGRA 400 plus User Manual

5 Line codes
Roche Diagnostics
COBAS INTEGRA 400 plus analyzer/Cedex Bio HT Analyzer · Software version 3.6/5.1 · Host Interface Manual · Version 1.24
Line codes 97
Results:
o If in Configuration Processing > Result Output
> Sample Type, the sample type is disabled, no
sample type information is transmitted to the host.
Ratio orders:
o If the component results of a ratio are measured from
different sample types, the Order Entry Sample Type
must be “???”.
u Related topics
• Configuring barcode setup (192)
• Line code 11: Reagent Lot Information (89)
Line code 54: Order Information
Example
54_••4_•4_S_These•are•21•chars•••<LF>
Description Format Range Range description
Compulsory Line code 54
Sample position rack number I3 0 Defined by barcode
1 to 999
Sample position tube number I2 0 Defined by barcode
1 to 15
Order priority S1 A Active
SSTAT
Optional Depending on database set-up parameters Leadertext 1 and 2
Sample leadertext 1 S21
Sample leadertext 2 S21
y Line code 54: Order Information

Roche COBAS INTEGRA 400 plus Specifications

General

Brand	Roche
Model	COBAS INTEGRA 400 plus
Category	Measuring Instruments
Language	English