9 Troubleshooting
Roche Diagnostics
COBAS INTEGRA 400 plus analyzer/Cedex Bio HT Analyzer · Software version 3.6/5.1 · Host Interface Manual · Version 1.24
Troubleshooting 179
Collated results
• In some cases the preparation of collated results may
take several minutes and by far exceed the normal
recommended timeout of 180 seconds.
• Starting with SW V3.4.4. the ratios will be collated with
other results. This is different from the behavior in SW
V3.3 where ratios where delivered in a separate block
as they had automatically a different sample type.
• Collated results selector 04 transmits also blocked and
invalid test results together with valid ones. Although
they are clearly flagged as such, this may become an
issue if the host does not properly handle result flags.
If you decide to use collated results in spite of
recommendations, it is better to use 10 03 rather than
10 04.
u Related topics
• Order entry (33)
To Next Page
Loading...
