Roche COBAS INTEGRA 400 plus User Manual

4 Block codes
Roche Diagnostics
COBAS INTEGRA 400 plus analyzer/Cedex Bio HT Analyzer · Software version 3.6/5.1 · Host Interface Manual · Version 1.24
76 Multi-configuration service blocks
Multi-configuration service blocks
In this section
Block 60: Multi-Configuration Service (MCS) Request
(host query) (76)
Block 61: Slot Configuration (76)
Block 62: Sample Tube Information (77)
Block 69: Service Request Response (78)
Block 60: Multi-Configuration Service (MCS) Request
(host query)
Block 60 has one line.
Block 60 provides requests for the following functions:
Block 61: Slot Configuration
The reply to an MCS request with service = 0 is block 61
with the current slot configuration.
The rack numbers of the racks in the slots are sent.
Line
code
Description
40 Service Selection
y Block 60
0 Slot configuration f response: block 61
1 Onboard sample tubes without orders (host query mode)
f response: block 62
This request is used when working in host query mode
with a barcode on each sample tube.
2 Cal/CS status per test f response: block 63
3 Reserved
4 List of all known sample tubes > response: block 62
Line
code
Description
41 Slot State
y Block 61

Roche COBAS INTEGRA 400 plus Specifications

General

Brand	Roche
Model	COBAS INTEGRA 400 plus
Category	Measuring Instruments
Language	English