Roche COBAS INTEGRA 400 plus User Manual

8 Line codes for extended host interface
Roche Diagnostics
COBAS INTEGRA 400 plus analyzer/Cedex Bio HT Analyzer · Software version 3.6/5.1 · Host Interface Manual · Version 1.24
166 List of line codes for extended HIF
Line Code 61: Test Status and blocked status
Example
61_•3_•1<LF>
If the test status is blocked additional information is
provided regarding the reason of the impediment.
Description Format Range Range description
Line Code 61
Test Status I2 16 Test disabled
31 Calibration postponed
3 Test blocked
17 OK
Blocked Status I2 Detailed information is provided
below
y Line Code 61: Test Status and blocked status
Status code Meaning
0 Okay
1 No fluid in sample cup
2 Reagent not on board
3 Reagent is empty
4 No cassette definition found
5 Diluent not on board
6 Diluent is empty
7 No diluent definition found
8 No calibrator on board
9 Calibrator empty
10 No valid calibration data
11 No calibration defintion available
12 No lot values for calibration available
13 Last calibration is not accepted
14 Control not on board
15 Control empty
16 Control is not valid
17 No control definition available
18 No assigned values for control available
19 Last control not accepted
20 Repeat action not possible
21 Test disabled
22 Error in cuvette handling
23 Test aborted
24 Calculation not possible
25 No ISE Electrode
26 Activation not performed
27 ISE module not ready
28 Error in ISE module
y Status codes

Roche COBAS INTEGRA 400 plus Specifications

General

Brand	Roche
Model	COBAS INTEGRA 400 plus
Category	Measuring Instruments
Language	English