Roche Diagnostics
COBAS INTEGRA 400 plus analyzer/Cedex Bio HT Analyzer · Software version 3.6/5.1 · Host Interface Manual · Version 1.24
3
Edition notice This publication is for Host Interface programmers and
Roche field engineers of the
COBAS INTEGRA 400 plus analyzer and the
Cedex Bio HT Analyzer. It explains the details of
communication between a host computer and an
instrument.Every effort has been made to ensure that all
the information contained in this publication is correct at
the time of publishing. However, the manufacturer of this
product may need to update the publication information
as output of product surveillance activities, leading to a
new version of this publication.
Where to find information The User Manual / Operator’s Manual for the
respective analyzer focuses on operation, maintenance,
troubleshooting, and basic configuration of the analyzers.
They also contain important safety information. You must
read the Safety chapter before operating the analyzer.
The Online Help includes all information of the User
Manual / Operator’s Manual. In addition it contains all
error messages and a complete software reference.
!
General attention
To avoid incorrect results, ensure that you are familiar
with the instructions and safety information.
r Pay particular attention to all safety notices.
r Always follow the instructions in this publication.
r Do not use the software in a way that is not described
in this publication.
r Store all publications in a safe and easily retrievable
place.
Training Do not carry out operation tasks or maintenance actions
unless you have received training from Roche
Diagnostics. Leave tasks that are not described in the
user documentation to trained Roche Service
representatives.
1.01 Minor corrections and additional hyper-links No Dec. 1998
1.02 - i_index: SC, Sequence Counter, BCS added - introduc: SC link added
in error handling - i_lc00: Example modified - i_flag: LC00 link added -
i_bc04: correction in text (patient result) - introduc: Note added; BCS
needs fixed field length - i_lc41, i_lc43, i_lc54, i_lc55, i_lc57: Examples;
leading 0 replaced by leading • - i_lc96, i_lc99: I2 changed to S2 -
i_flags: leading 0 removed - i_lc53: Ratio Order note inserted - i_bc03:
Collated Order note inserted - appendix: Additional instrument codes
(AmpliLink, AmpliPrep and TaqMan) - i_lc10: More detailed
explanation
No Feb. 1999
1.00 First HTML version, based on Revision 2.1 of the paper manual. Valid
for Integra SW versions 9561 and 9562.
Oct. 1998
Version Description Mandatory Date
y Revision history
To Next Page
Loading...
Need help?
General
