Rockwell Automation POINTBlock Series User Manual

Publication 1734-UM001D-EN-P - April 2008
216 Configure POINT I/O Modules for DeviceNet Networks
2. From the Device Parameters dialog, select Single and change or
configure parameters one at a time, or select All to change all selections
at once.
Note that if autobaud is selected, the communication rate of this module
automatically matches the communication rate of the existing devices on
the network, and you are prevented from selecting a specific
communication rate.

Rockwell Automation POINTBlock Series Specifications

General

Brand	Rockwell Automation
Model	POINTBlock Series
Category	I/O Systems
Language	English