Rockwell Automation POINTBlock Series User Manual

Publication 1734-UM001D-EN-P - April 2008
218 Configure POINT I/O Modules for DeviceNet Networks
2. From the Device Parameters dialog, set parameters for the module to
include sequential addressing and autobaud or, if not using autobaud,
communication rate.
The Groups pull-down menu includes the following:
• All parameters
• I/O output value
• I/O output status
• Reset services
• POINTBus
• Configuration

Rockwell Automation POINTBlock Series Specifications

General

Brand	Rockwell Automation
Model	POINTBlock Series
Category	I/O Systems
Language	English