Rohde & Schwarz R&S RTB2004 - Page 334

Remote Control Commands
R&S
®
RTB2000
326User Manual 1333.1611.02 ─ 04
MASK:ACTion:SCRSave:DESTination <File>
Defines the path and filename for a screenshot that will be saved on mask violation.
The file format is PNG, the filename is incremented automatically.
Parameters:
<File> String parameter
Example:
MASK:ACT:SCRS:DEST "/USB_FRONT/MASKS/VIOL"
On first violation, the screeenshot is saved to VIOL.PNG, on
second violation to VIOL01.PNG, the third to VIOL02.PNG ...
MASK:ACTion:WFMSave:DESTination <File>
Defines the path and filename for a waveform data that will be saved on mask viola-
tion. The file format is CSV, the filename is incremented automatically
You can also change the storage location, file name and/or file format manually in the
"File" > "Waveforms" menu. Remote control uses the recent settings.
Parameters:
<File> String parameter
Example:
MASK:ACT:WFMS:DEST "/USB_FRONT/MASKS/VIOL"
On first violation, the waveform data is saved to VIOL.CSV, on
second violation to VIOL01.CSV, the third to VIOL02.CSV ...
MASK:ACTion:YOUT:ENABle <Yout>
Creates a pulse on the AUX OUT connector if the mask is violated. This selection sets
the configuration of the AUX OUT connector to "Mask Violation".
Same as MASK:ACTion:PULSe:EVENt:MODE on page 325.
Parameters:
<Yout> ON | OFF
*RST: OFF
15.8.1.3 Mask Test
MASK:TEST..................................................................................................................326
MASK:RESet:COUNter...................................................................................................327
MASK:COUNt?..............................................................................................................327
MASK:VCOunt?.............................................................................................................327
MASK:TEST <Test>
Starts, finishes or interrupts a mask test.
Parameters:
<Test> RUN | STOP | PAUSe
*RST: STOP
Applications