Rohde & Schwarz R&S RTB2004 - Page 361

Remote Control Commands
R&S
®
RTB2000
353User Manual 1333.1611.02 ─ 04
MMEMory:DCATalog:LENGth?....................................................................................... 355
MMEMory:CATalog?...................................................................................................... 355
MMEMory:CATalog:LENGth?..........................................................................................356
MMEMory:COPY........................................................................................................... 356
MMEMory:MOVE...........................................................................................................357
MMEMory:DELete..........................................................................................................357
MMEMory:DATA............................................................................................................357
MMEMory:STORe:STATe...............................................................................................358
MMEMory:LOAD:STATe.................................................................................................358
MMEMory:DRIVes?
Returns the storage devices available on the R&S RTB2000.
Parameters:
<Drive> List of strings, for example, ""/INT"",""/USB_FRONT""
/INT: internal storage
/USB_FRONT: USB connector on the front panel
Usage: Query only
MMEMory:MSIS <Drive>
Changes the default storage location (drive).
Parameters:
<Drive> One of the available drives: /INT, or /USB_FRONT
Example:
MMEM:MSIS '/USB_FRONT'
Sets the USB flash drive connected to the front panel as storage
location.
MMEMory:MDIRectory <DirectoryName>
Creates a new directory with the specified name.
Setting parameters:
<DirectoryName> String parameter
Absolute path including the storage device, or relative to the cur-
rent directory.
Example: Create directory DATA on the front USB flash device, with abso-
lute path:
MMEM:MDIR "/USB_FRONT/DATA"
Example: Create directory JANUARY in the DATA directory, with relative
path:
MMEM:CDIR "/USB_FRONT/DATA/"
MMEM:MDIR "JANUARY"
Usage: Setting only
Documenting Results