Rohde & Schwarz R&S RTB2004 - Page 453

Remote Control Commands
R&S
®
RTB2000
445User Manual 1333.1611.02 ─ 04
WGENerator:MODulation:AM:FREQuency <Frequency>
Sets the frequency of the modulating waveform for AM modulation.
Parameters:
<Frequency>
WGENerator:MODulation:AM:DEPTh <ModulationDepth>
Sets the modulation depth, the percentage of the amplitude range that is used for AM
modulation.
Parameters:
<ModulationDepth>
WGENerator:MODulation:FM:FREQuency
<Frequency>
Sets the frequency of the modulating waveform for FM modulation.
Parameters:
<Frequency>
WGENerator:MODulation:FM:DEViation <Deviation>
Sets the frequency deviation, the maximum difference between the FM modulated sig-
nal and the carrier signal.
Parameters:
<Deviation>
WGENerator:MODulation:ASK:FREQuency <Frequency>
Sets the frequency of the modulating waveform for ASK modulation.
Parameters:
<Frequency>
WGENerator:MODulation:ASK:DEPTh <ModulationDepth>
Sets the modulation depth, the percentage of the amplitude range that is used for ASK
modulation.
Parameters:
<ModulationDepth>
WGENerator:MODulation:FSK:HFREquency <HoppingFrequency>
Sets the second frequency of the FSK-modulated signal.
Parameters:
<HoppingFrequency>
Signal Generation (Option R&S RTB-B6)