Remote Control Commands
R&S
®
RTB2000
444User Manual 1333.1611.02 ─ 04
Parameters:
<FilePath> string
*RST: "
WGENerator:ARBitrary[:FILE]:OPEN
Loads the arbitrary waveform, that is selected with the WGENerator:ARBitrary[:
FILE]:NAME command.
Usage: Event
WGENerator:MODulation[:ENABLE]
<Enable>
Activates or deactivates modulation of the function generator output. To define the
modulation function, see WGENerator:MODulation:FUNCtion.
Parameters:
<Enable> ON | OFF
WGENerator:MODulation:FUNCtion <ModulationFunction>
Selects a function for the modulation.
Parameters:
<ModulationFunction>SINusiod | SQUare | TRIangle | RAMP
WGENerator:MODulation:TYPE <ModulationType>
Sets the modulation type, which defines how the carrier signal is modified.
Parameters:
<ModulationType> AM | FM | ASK | FSK
AM
Amplitude modulation. The amplitude of the carrier signal is var-
ied according to the modulation signal.
FM
Frequency modulation. The frequency of the carrier signal is var-
ied according to the modulation signal.
ASK
Amplitude shift keying (ASK) modulation. The amplitude
switches between 100% and the WGENerator:MODulation:
ASK:DEPTh amplitude with a defined modulating WGENerator:
MODulation:ASK:FREQuency.
FSK
Frequency shift keying (FSK) modulation. The signal frequency
switches between the carrier frequency and the WGENerator:
MODulation:FSK:HFREquency at a WGENerator:
MODulation:FSK:RATE.
Signal Generation (Option R&S RTB-B6)
To Next Page
Loading...
