Rohde & Schwarz R&S RTB2004 - Page 459

Remote Control Commands
R&S
®
RTB2000
451User Manual 1333.1611.02 ─ 04
PGENerator:PATTern:ARBitrary:DATA[:SET] <ArbitraryData>
Defines the arbitrary pattern.
Parameters:
<ArbitraryData> List of Values
Example: PGEN:PATT:ARB:DATA 0,1,1,1,2,0,3,1,4,0
PGENerator:PATTern:ARBitrary:DATA:APPend <AppendData>
Defines the arbitrary pattern.
Setting parameters:
<AppendData> List of Values
Example: PGEN:PATT:ARB:DATA:APP 4
From index = n, the oscilloscope appends a 4 in HEX to the pat-
tern.
Usage: Setting only
PGENerator:PATTern:ARBitrary:DATA:APPend:BOR <AppendData>
From index = n, data will be integrated in existing pattern via OR combination.
Setting parameters:
<AppendData> List of Values
Usage: Setting only
PGENerator:PATTern:ARBitrary:DATA:APPend:BAND <AppendData>
From index = n, data will be integrated in existing pattern via AND combination.
Setting parameters:
<AppendData> List of Values
Usage: Setting only
PGENerator:PATTern:ARBitrary:DATA:APPend:INDex <AppendIndex>
Defines the index of the arbitrary pattern.
Parameters:
<AppendIndex> Numeric value
Example: PGEN:PATT:ARB:DATA:APP:IND 5
PGEN:PATT:ARB:DATA:APP 4
From index = n, a pattern length of 6 will be defined with last
high bit 4.
Signal Generation (Option R&S RTB-B6)