Data and File Management
R&S
®
RTM20xx
231User Manual 1317.4726.02 ─ 01
2.
Configure the storage location as described in "To select the storage directory"
on page 218.
3.
Enter the file name as described in "To define a new file or directory name"
on page 218.
4. Select the "Format" and the "Color mode".
For details, see chapter 13.2.5.2, "Screenshot Storage Settings", on page 231.
5. Press "Save".
See also: chapter 13.2.2, "Quick Access with PRINT key", on page 223.
13.2.5.2 Screenshot Storage Settings
With FILE > "Screenshots" you open a menu to save or print screenshots of the current
display.
For a description of the common save functions "Storage", "File Name", and "Save", see
chapter 13.2.1.3, "General Storage Settings", on page 220. Specific settings for saving
screenshots are described below.
Format.........................................................................................................................231
Color mode..................................................................................................................231
Print.............................................................................................................................232
Format
Defines the format of the screenshot file. The following formats are available:
●
BMP
BitMaP is an uncompressed format, files are large and saving might take some time.
●
PNG
Portable Network Graphics is a graphic format with lossless data compression.
Remote command:
HCOPy:LANGuage on page 442
Color mode
Defines the color mode for saved screenshots.
"Grayscale"
Black and white output
"Color"
Color output
"Inverted"
Inverts the colors of the output, i.e. a dark waveform is printed on a white
background
Remote command:
HCOPy:COLor:SCHeme on page 442
Saving and Loading
To Next Page
Loading...
