Remote Control
R&S
®
RTM20xx
359User Manual 1317.4726.02 ─ 01
15.2.12.1 General Search Configuration
SEARch:STATe.............................................................................................................359
SEARch:CONDition........................................................................................................359
SEARch:SOURce..........................................................................................................361
SEARch:GATE:MODE....................................................................................................361
SEARch:GATE:ABSolute:START....................................................................................361
SEARch:GATE:ABSolute:STOP......................................................................................361
SEARch:STATe <SearchState>
Enables and disables the search mode.
Parameters:
<SearchState> ON | OFF
*RST:  OFF
Example: 
chapter 15.3.2.1, "Searching for a Pulse of Specified Width",
on page 460
Firmware/Software:  FW 03.400
SEARch:CONDition <SearchCondition>
Selects the event you want to search for.
 
Command Reference